Newmen BB CB 17x26x5 CN LLH Ball Bearing for FADE Road Hubs

With the high-quality deep groove ball bearings by Newmen, your FADE or FADE R hub will run like new. Worn bearings can be easily replaced with new ones to restore perfect smooth running.

The blue LLH seal makes the ball bearing particularly smooth-running and is especially recommended for use on road bikes, CX and gravel bikes. The size 17x26x5 replaces both the front and rear hub bearings as well as the inner one of the two freewheel bearings on the FADE R freewheel. For the outer freewheel bearing (or both bearings of the FADE freewheel), you will need the size 15x24x5, which is available with prod. code 2349041.

Technical details:
• Material: steel
• Inside diameter: 17 mm
• Outside diameter: 26 mm
• Width: 5 mm
• Number of ball races: single row
• Double-sealed angular contact ball bearing
• Seal: LLH (Road, blue)

Suitable among others for:
• Newmen Fade hubs
• Newmen Fade R hubs + freehub body (inside)
Note:
The coloured side of the bearing must always point in a specified direction. Please note the positioning of the old bearings when removing them. Exploded views of NEWMEN hubs with bearing positioning can be found at newmen-components.de/downloads.

In the box:
• 1 Newmen BB CB 17x26x5 CN LLH ball bearing


Tip:
The matching Newmen Hub Tooling Set for easy bearing replacement can be found under prod. code 2349050, a practical end cap puller under prod. code 2349047.




Manufacturer: MG-Components GmbH & Co. KG, Am Mühlbach 5c, 87487 Wiggensbach, Germany, www.newmen-components.de